
When it comes to maintaining your John Deere equipment—tractors, mowers, Gators, skid steers, or combines—oil filters are critical for engine longevity. But original John Deere filters can be pricey or out of stock. That’s where oil filter cross-referencing becomes essential.
This comprehensive guide covers:
- Cross-reference chart for popular John Deere oil filters
- Compatible WIX, Fleetguard, Baldwin, Fram, Napa Gold, and others
- Filter specs, thread sizes, and bypass ratings
- FAQs about warranty, quality, and substitutes
- Smart buying tips and maintenance advice
🔄 Why Use a Cross-Reference Oil Filter?
John Deere doesn’t manufacture its own filters—they’re rebranded from suppliers like Fleetguard, Donaldson, and Baldwin. Many top-tier aftermarket brands offer direct fit, equal or better filtration at a fraction of the cost.
Benefits of Cross-Referencing:
- Lower cost per filter (up to 50% savings)
- Easier sourcing from local or online retailers
- High-quality alternatives with same or better specs
- Options for synthetic media and extended service intervals
🛠️ John Deere Oil Filter Cross Reference Chart
Here’s a list of the most popular John Deere oil filters and their aftermarket equivalents:
| John Deere Filter | WIX | NAPA Gold | Fleetguard | Baldwin | Fram | Applications |
|---|---|---|---|---|---|---|
| M806418 | 51365 | 1365 | LF3970 | B7165 | PH3614 | Compact tractors, lawn mowers (X300, X500, 1025R) |
| M806419 | 51334 | 1334 | LF701 | B1402 | PH8A | JD 3020, 4020, Gators |
| AM125424 | 51056 | 1056 | LF654 | B7165 | PH3614 | JD ZTrak, lawn tractors |
| RE504836 | 57202 | 7202 | LF16035 | B7299 | XG7317 | 5000/6000/7000 series tractors |
| RE509672 | 57703 | 7703 | LF17511 | BT7349 | XG7317 | 6R/7R/8R series, heavy-duty engines |
| RE45864 | 57060 | 7060 | LF9025 | BT287 | PH3614 | JD Skid steers, mid-size tractors |
| AT314164 | 57356 | 7356 | LF3972 | BT7349 | – | Excavators, loaders |
| AM107423 | 51394 | 1394 | LF3831 | B173 | PH3387A | Older riding mowers |
| MIU800645 | 57035 | 7035 | LF16015 | B1431 | PH2867A | Subcompact 1-series |
Note: Always verify with equipment manuals or dealer if unsure.
🔍 Oil Filter Specs Breakdown
Here’s how to compare filters using important specs:
| Spec | What It Means |
|---|---|
| Micron Rating | Particle size the filter traps (lower = finer) |
| Burst Pressure | Max pressure the filter can withstand before rupture |
| Bypass Valve PSI | When clogged, lets oil bypass the media (usually 8–15 psi) |
| Anti-Drainback Valve | Prevents dry starts by holding oil in engine |
| Thread Size | Must match your oil mount (e.g., 3/4″-16 or M20x1.5) |
| Filter Height | Needed for clearance and fit under shrouds/hoods |
🧪 Comparison of Filter Quality by Brand
| Brand | Filtration Efficiency | Build Quality | Warranty Impact | Best Used For |
|---|---|---|---|---|
| John Deere | OEM Standard | Good | Full Warranty | Dealer-based service |
| WIX | 95–99% @ 23 microns | Excellent (metal ends) | Accepted by most shops | Premium substitute |
| Fleetguard | 97% @ 20 microns | OEM-equivalent | OEM supplier | Diesel engines |
| Baldwin | 95% @ 20–25 microns | Heavy-duty steel | Widely accepted | Industrial/ag use |
| NAPA Gold | ~95% (made by WIX) | Identical to WIX | Accepted | General purpose |
| Fram Extra Guard | ~94% | Budget-friendly | Limited acceptance | Light-duty mowers |
Pro Tip: Avoid Fram’s cheaper orange can filters for diesel engines. Use Fram Ultra Synthetic for extended intervals.
🧰 Examples by Machine Model
🟢 John Deere 1025R
- OEM Filter: M806418
- Cross: WIX 51365, Fleetguard LF3970, Baldwin B7165
🟢 John Deere X300
- OEM: AM125424
- Cross: NAPA Gold 1056, WIX 51056
🟢 John Deere 3020/4020
- OEM: M806419
- Cross: WIX 51334, Baldwin B1402, Fleetguard LF701
🟢 John Deere 5055E, 5065E
- OEM: RE504836
- Cross: WIX 57202, Fleetguard LF16035
🟢 John Deere ZTrak 915B
- OEM: AM125424
- Cross: Baldwin B7165, Fram PH3614
🟢 John Deere 6430, 7330
- OEM: RE509672
- Cross: WIX 57703, Fleetguard LF17511
🛡️ Will Using an Aftermarket Oil Filter Void My Warranty?
No, using a compatible aftermarket filter will not void your warranty under U.S. law (Magnuson-Moss Warranty Act). However:
- You must follow OEM service intervals.
- The filter must meet or exceed JD specs.
- Keep receipts and part numbers in case of disputes.
Dealers may push JD-branded filters, but they cannot legally require you to buy them—unless provided free.
🔄 When to Replace Your John Deere Oil Filter
| Machine Type | Interval (Hours) | Conditions |
|---|---|---|
| Lawn Tractors | Every 50–100 hrs | Light to moderate use |
| Compact Utility Tractors | Every 100 hrs | Normal use |
| Gators & UTVs | Every 100–150 hrs | Mixed terrain |
| Diesel Tractors >75 HP | Every 250 hrs | Heavier commercial use |
| Skid Steers/Loaders | Every 250–300 hrs | Dusty, off-road use |
Tip: Always change oil with the filter and prefill the new filter with oil before install to avoid dry starts.
🛒 Where to Buy Filters Online
Best Options:
- Amazon – Wide variety of brands, bundles
- Filter1.com – Great for WIX, Baldwin bulk orders
- FleetFilter.com – Fleetguard and Baldwin specialists
- NAPA Auto Parts – Easy pickup for NAPA Gold filters
- GreenPartStore – For John Deere OEM parts
Pro Tip: Buy in bulk (3–6 packs) to save 20–30% long-term.
🔧 How to Install a New Oil Filter (Quick Steps)
- Drain the Oil: Warm the engine, then drain the oil completely.
- Remove Old Filter: Use a filter wrench if stuck. Clean gasket mating surface.
- Pre-fill and Oil Gasket: Fill new filter with oil, lubricate the rubber gasket.
- Install Hand-Tight: Screw the new filter until gasket touches, then 3/4 turn more.
- Refill Engine Oil: Top off with manufacturer-specified oil.
- Start and Check for Leaks: Let engine run 30 seconds, check under filter for leaks.
🔄 Long-Term Maintenance Tips
- Use synthetic diesel oil (like Rotella T6) for longer intervals and better cold starts.
- Keep a filter log with brand, part #, and hours run.
- Store filters in a dry, dust-free place to avoid contamination.
- Don’t overtighten filters—it can cause warping or future leaks.
- Consider oil sample testing if running >250 hours between changes.
❓ Frequently Asked Questions (FAQs)
Q: Can I use a longer oil filter for more capacity?
Yes, but check for clearance. Many users upgrade to extended-length WIX or Baldwin filters with no issues.
Q: Are WIX and NAPA Gold the same?
Yes. WIX makes NAPA Gold filters to the same specs in the same factory.
Q: Should I always replace the oil filter with every oil change?
Absolutely. Reusing filters can allow sludge, metal, and debris to recirculate through your engine.
Q: Can I use car oil filters on a JD mower?
Only if the specs match (thread, bypass PSI, etc.). Many small John Deere engines use filters similar to those in Toyotas or Hondas.
- OEM Cross Reference:P583540 SJ11784 SH66239
- Application Models: Compatible with John Deere 5M SERIES Tractors
- Thread size M140 x 4
- Manufactured to OEM standards and rigorously tested at the factory
- FITS MANY MODELS OF JOHN DEERE
- This is a genuine John Deere oil filter
- Exact fit genuine parts are designed specifically for John Deere products
- Check description and parts illustrated diagrams to ensure the part is a suitable replacement
- Replaces:LVU34503 LVU34504 AM116304 LVA16054 M806418 MIU804763
- Compatible with:John Deere Compact Utility Tractor: 1023E 2018-2022 JJ117914- (PIN: 1LV1023ECHJ108501 – 1LV1023EKNN155321), (PIN: 1LV1023EAHJ300701 – 1LV1023ECNN306704); 2023-;1025R 2018-2022 JJ153037- (PIN: 1LV1025RVHJ137501-1LV1025RALK199999), (PIN: 1LV1025RCHJ300901-1LV1025RANN304011), (PIN: 1LV1025RKKK400101-1LV1025RKNN406791), (PIN: 1LV1025RCLK800101-1LV1025RPNN854088); 2023-
- Compatible with:John Deere Compact Utility Tractor:1026R 2018-2022 JJ202259-, (PIN: 1LV1026RKHJ201501 – 1LV1026RHNN207263); 2023-;2025R 2018-2022 JJ103921- (PIN: 1LV2025RAHJ100101 – 1LV2025RVNN141283), (PIN: 1LV2025RKHJ300101 – 1LV2025RVNN301372), (PIN: 1LV2025RCKK400101 – 1LV2025RTNN402711); 2023-;2026R 2018-
- easy to use:easy to install,Standardized manufacturing and quality material to ensure excellent performance and excellent service life.
- Online:24-hour
- 【Efficient Filtration】The AUC12916 easy change oil filter uses high-performance media to effectively capture fine particles and contaminants while minimizing flow restriction. This ensures consistent lubrication, reduces engine wear, and helps extend overall engine life
- 【2-Year Warranty】 This product comes with a 2-year warranty, giving you peace of mind and protection against defects in materials or workmanship
- 【Premium Quality Construction】Built with durable, high-quality filter materials, the AUC12916 delivers superior oil cleanliness and smooth engine performance. Designed specifically for John Deere 100 Series lawn tractors, it provides reliable protection and long-lasting efficiency
- 【Compatible with】Fits John Deere 100 Series models equipped with the Easy Change oil filter system, including E120, E130, E150, E160, E170, and E180;Oil filter Part Number: AUC12916(Easy Change 30-Second Oil FIlter System)
- 【Extended Service Life】Manufactured to OEM standards using durable, precision-engineered materials for excellent reliability. Ensures a proper fit and hassle-free installation while supporting longer service intervals
- John Deere Original Equipment Oil Change Kit
- Kit Includes: (1) M806419 Oil Filter, (1) Gallon TY26673 15W-40 Oil, and (2) Quarts TY26674 15W-40 Oil
- NOTE: TY26673 and TY26674 are the exact same oil, just in different containers
- This fits John Deere tractor models: 770, 790, 1070, 2025R, 2027R, 2032R, 2520, 2720,3005, 3032E, 3033R, 3036E, 3038E, 3120, 3203, 3320, 3520, 4105, 4115, 4200, 4210, 4300, 4310, 4400, 4410, 4500, 4510, 4600, 4610, 4700, 4710, 110TLB,1445.
- This is a genuine John Deere part. Thanks for looking!
✅ Conclusion: Choose the Right Filter—OEM or Not
Whether you’re maintaining a John Deere 1-series subcompact or a 7R row crop beast, choosing the right oil filter is essential for reliability and longevity. With quality aftermarket brands like WIX, Baldwin, and Fleetguard, you don’t have to be tied to dealer pricing.
🔧 Final Recommendations:
- Use OEM for warranty-sensitive machines (<100 hrs or new)
- Use cross-referenced filters for budget, convenience, or bulk maintenance
- Keep track of changes, hours, and parts used
- Consider filter upgrades for extended drain intervals or severe-duty conditions

I’m David man behind Lawn Mowerly; I’ve been dealing with lawnmowers and Tractors with my father since I was a kid. I know every make and model and what each one is capable of and love helping people find the perfect equipment for their needs.
