We all know that Kubota makes great tractors. But what happens when one of their most popular models, the M7060, starts having problems?
In this blog post, we’ll take a look at some of the most common Kubota M7060 problems and what you can do to fix them.
Whether you’re a farmer or just someone who uses this tractor for their own personal property, this blog post is for you.
So let’s get started!
Common Kubota M7060 Problems
1. 3 Point Hitch Problem
The Kubota M7060 has a known issue with its 3 point hitch, and many owners have had difficulty getting their tractor to operate smoothly as a result.
However, there are some things you can do to try to resolve the issue. First, make sure that the hydraulic top link is set in the correct position.
If it’s in the bottom hole, it can cause the ratcheting effect. Second, check the size of the top link cylinder. If it’s too big, it won’t fit in the top position and will cause problems.
Finally, make sure that all of the parts are properly lubricated. If they’re not, they can bind and cause the ratcheting effect.
If you follow these steps and still have difficulty, you may need to contact your dealer for further assistance.
2. Loader Issues
If you’re having loader problems with your Kubota M7060, you’re not alone.
Numerous owners have reported issues with the loader, including slow lifting, lack of power, and difficulty dumping. In most cases, these problems can be traced back to a few common causes.
One potential issue is low hydraulic fluid levels. If the fluid is too low, it can cause the pump to work harder, leading to slower lifting and reduced power.
Another possibility is a problem with the relief valve. If the valve is stuck or damaged, it can restrict flow and cause the loader to perform poorly.
Finally, blockages in the hydraulic lines can also lead to loader problems.
If you’re having trouble with your Kubota M7060 loader, check these potential issues before taking it in for service.
3. De-Clutch Problem
The Kubota M7060 is a versatile tractor that can be used for a variety of tasks.
However, there have been some reports of problems with the tractor, the most common being a faulty de-clutch switch.
This can cause the tractor to fail to go into gear when shifting, which can be a major inconvenience.
This can be a major problem, especially if the tractor is being used in an agricultural setting.
Fortunately, the problem can be fixed by replacing the de-clutch switch.
4. Vibration Problem
Some users have reported problems with vibration during operation. In most cases, this is caused by an imbalance in the tires or wheels.
While this is not a serious problem, it can be annoying and may cause premature wear on the tires or wheels.
If you notice excessive vibration while operating the Kubota M7060, it is recommended that you check the tires and wheels for an imbalance.
You may also want to check the body of the tractor for looseness or damage.
5. Tractor Hard to Start
Starting problems with the Kubota M7060 tractor can be caused by a number of different issues.
One common problem is that the fuel filter becomes clogged, preventing fuel from reaching the engine.
This can be remedied by performing regular maintenance on the fuel filter.
Another issue that can cause starting problems is air in the fuel system. This can be fixed by bleeding the system to remove the air bubbles.
Another potential cause of starting problems is clogged or defective injection nozzles. This can be resolved by either cleaning or replacing the nozzles.
In some cases, the fuel injection pump may be damaged, requiring a rebuild or replacement.
6. Engine Stall
One of the most common problems with the Kubota M7060 is engine stall. This can be caused by a number of factors, but the most likely cause is a wrong setting of the fuel injection pump timing.
If your M7060 is stalling, it is important to check the timing and adjust it as recommended.
Another common cause of engine stall is a dirty fuel filter. If your filter is clogged, it will prevent enough fuel from reaching the engine, causing it to stall.
To fix this problem, you can either clean the filter or install a new filter element. Finally, low coolant temperatures can also cause engine stall.
If your engine is not reaching the required temperature, it will stall. To fix this problem, you need to warm up the engine to the required temperature.
7. Engine Overheating
If your Kubota M7060 engine is overheating, there are several potential causes. First, check the radiator cap to see if it is defective or if the radiator fins are clogged.
If so, you can clean the radiator or install a new cap.
Another possible cause is that the coolant level is low. Simply fill the radiator to the proper level and check other components for faults.
Yet another potential issue is a broken or loose fan belt. If necessary, replace the belt with a new one. Finally, insufficient engine oil can also lead to overheating.
Be sure to check the oil level and add more if needed. By troubleshooting each of these potential issues, you should be able to get your Kubota M7060 running smoothly again in no time.
8. Noisy Transmission
Users of the Kubota M7060 have reported that the transmission on their machine is excessively noisy. There are several possible causes for this issue, including worn gears or incorrect backlash.
In some cases, simply replacing the defective gears or setting the backlash properly can solve the problem.
Other times, the issue may be with the shift forks, which may be worn or bent. In this case, they will need to be replaced.
Additionally, damaged or worn shaft splines may be causing the noise, and the entire shaft will need to be changed. Finally, lack of transmission fluid can also lead to noisy operation.
Be sure to check the level and add fluid as needed. In some cases, bearings may be cracked or worn, causing excessive noise.
These will need to be changed in order to fix the problem. Finally, transmission oil that is contaminated can also lead to noisy operation.
Be sure to drain and refill the oil as needed.
9. Gears Hard to Shift
Anyone who has ever driven a manual transmission knows that shifting gears can be a bit tricky. And when the gears are hard to shift, it can make driving a real chore.
If you’re having trouble shifting gears on your Kubota M7060, there are a few potential causes.
The most common issue is simply that the shift linkage is corroded or worn. Lubricating or replacing the shift linkage is usually all it takes to fix the problem.
However, if the clutch is worn or not properly adjusted, it can also make shifting gears difficult. Adjusting or replacing the clutch is typically a fairly simple fix. In some cases, however, the problem may be more serious, such as bent or worn out shift forks.
If this is the case, you’ll need to replace the defective shifter forks.
Finally, if the gear shift mechanism is damaged, it will need to be replaced or repaired.
While some of these issues are more complex than others, they can all be resolved fairly easily with the help of a qualified mechanic.
10. Starter Cranks Slowly
Many Kubota owners have experienced the starter cranking slowly, or not at all. There are several possible causes for this problem. First, the battery may be drained and in need of a recharge.
If the battery won’t hold a charge, it will need to be serviced or replaced. Another possibility is that the battery terminals are corroded or the wires are disconnected.
Check the cable connections and replacing or servicing the terminals as necessary.
Finally, if the starter itself is damaged, it will need to be repaired or replaced.
What Customers Say About Kubota M7060?
According to customer reviews, one of the main benefits of the Kubota M7060 is its versatility. The tractor can be equipped with a wide range of attachments, making it suitable for a variety of tasks.
Another common praise for the Kubota M7060 is its durable construction. Customers report that the tractor is able to withstand heavy use and still perform well.
In addition, many customers appreciate the comfortable cab and easy-to-use controls.
Overall, the Kubota M7060 is a versatile and durable tractor that is well-suited for a variety of applications.
Conclusion
In conclusion, the Kubota M7060 has a few problems that need to be considered before purchasing. The main issue is the sending unit for the fuel gauge, which is known to fail. The other main problem is with the hitch, loader and engine.
However, these problems can be fixed relatively easily, and the Kubota M7060 is still a good tractor overall. It is reliable, efficient, and packed with features that make it a great choice for those in the market for a new tractor.
I’m David man behind Lawn Mowerly; I’ve been dealing with lawnmowers and Tractors with my father since I was a kid. I know every make and model and what each one is capable of and love helping people find the perfect lawn mower for their needs.
